Wengart Insulated Inline Splice Connector QMS-D2/0-1 (4-Pack), 2/0-6 AWG Wire Range, 600V Dual Rated for Copper and Aluminum Conductors, Pre-Filled with Oxide Inhibitor, UL Listed, Black

QMS-D2/0-1 Insulated Inline Wire Splice Component (4-Pack) The QMS-D2/0-1 is a technical component designed for splicing or tapping power cables. Utilizing a high-dielectric plastisol coating, this connector is designed for 600V applications, providing a functional alternative to manual taping in varied environmental conditions. Technical Specifications:Model: QMS-D2/0-1 (4 Units)Wire Range: 2/0 AWG to 6 AWG (Stranded)Required Strip Length: 32.8 mmTorque (2/0 AWG): 170 in-lbs (19.2 N.m)Fastener Size: 7/32" Allen Hex ScrewCertifications: UL Listed and CSA CertifiedInstallation and Component FAQQ: What is the recommended wire preparation for this connector? A: For the QMS-D2/0-1, the specified wire strip length is 32.8 mm. This measurement allows the conductor to be seated within the connector housing without exposing bare wire.Q: How is the connection secured? A: Securement is achieved via a 7/32" Allen hex screw. Please refer to the torque specifications for your specific wire gauge (ranging from 110 to 170 in-lbs) to maintain the mechanical integrity of the splice.Q: Is additional oxide inhibitor required? A: Each port comes pre-filled with inhibitor. For standard installations, additional compound is generally not required unless specified by local electrical codes for specific conductor types.

• Efficient 4-Pack for Project Needs: This value pack includes four QMS-D2/0-1 insulated inline connectors, providing a functional solution for multi-point splicing in residential service entrances or commercial electrical distribution panels.
• Dual Rated Conductor Versatility (2/0-6 AWG): Engineered for use with stranded copper (Cu) or aluminum (Al) conductors ranging from 2/0 down to 6 AWG. This dual-rated capability supports varied technical requirements in junction boxes, gutters, and wireways.
• Pre-Filled with Oxide Inhibitor: Each port comes pre-loaded with a high-conductivity oxide inhibiting compound. This feature manages the contact resistance of aluminum-to-copper joints, supporting the integrity of the connection in standard electrical environments.
• Precise Technical Specifications: To support mechanical stability, this connector requires a wire strip length of 32.8 mm. It accommodates specific torque applications: 110 in-lbs for 6 AWG up to 170 in-lbs for 2/0 AWG (7/32" Allen hex wrench required).
• High Dielectric Strength Insulation: The rugged black plastisol coating is rated for 600V and 90°C (194°F). It remains resilient in cold temperatures down to -45°C (-49°F), designed to resist cracking during extreme seasonal temperature shifts in outdoor applications.